If you want your plastic item to look like it’s actually distressed metal, you will have to decide on whether you want to paint the item a metallic color, or if you just want to make it look like metal is only being exposed in a few places.

Covering Your Item in a Metallic Color

If you want your item to look like mostly bare metal, or if you want to create chipping or other effects that realistically expose the under layer, then you will want to cover the visible surfaces in metallic paint or another material. For maximum realism, you will usually want a highly-reflective paint or coating.

For tips on getting your paint to adhere better, scroll to the bottom of plastic painting.

Reflective Spray Paints

Krylon makes these two spray paints that are a good value for a spray paint with an exceptionally reflective finish.

Krylon 1010A Premium Metallic Original Chrome

Krylon 1000 Premium Metallic Spray Paint, Gold

Metallic Spray Paints

Silver, Gold, Brass, Copper, Aged Brass, Antique Brass, Burnished Brass

Hammered Texture Spray Paint

Copper, Antique Pewter, Charcoal Gray

Rub N Buff

A wax that contains metallic powder, Rub N Buff is a popular way to create very realistic metal effects. It’s available in Silver Leaf, Gold, Spanish Copper, Patina, Antique Gold, Ruby, Grecian Gold, European Gold, Ebony, Autumn Gold, Antique White, Pewter.

Chipped Paint Masking Techniques

Once you have covered your item in a metallic color, you can apply paint-chipping effects.

Latex Masking Fluid

Apply 2-3 coats of latex masking fluid where you want your chips to be. Apply paint. Remove the masking fluid to reveal the artificial chip in the paint. For a better effect, make your coats of paint thick. Leave your dried masking fluid alone, and instead, add more fluid over your first area, enlarging the area of the chip with each layer of paint. This will result in a quarry-type of effect. Changing the colors of each layer, especially between the primer and top coat, will make it more convincing. Use a pointy tool to pry up and peel your masking layers away. At the end, you can also go over the whole item with a black wash (black paint diluted with water in about a 1 to 4 ratio) to help make the steps between the layers more deep and pronounced.

Other Masking Materials

Other materials you can use to mask the chip areas are rubber cement, petroleum jelly, and mustard.

Faux Paint Patinas

The first patinas we will cover are techniques you can use for any metal or material. These can make plastic look like old or rusty metal.

Brushed-on Paint Patina

Use stippled-on flat black paint, and optionally, rust-colored paints, to your item.

Products in this video
• 80-grit sandpaper
• Stipple brush
• Matte black acrylic paint
• Raw umber acrylic paint
• Burnt umber acrylic paint

Water-Masking & Spray Paint

To create a random patina pattern, use a spray bottle to spray your item. This works best on a flat item that is relatively level, because you want the beads of water to stay on your surface. Once you’ve got a generous amount of beading on your item, apply a flat black spray paint (or patina color of your choice) over the surface. Allow the water to dry, or absorb it with a paper towel after the spray paint is dry.

Reactive Metal Paints

What could be more realistic than applying actual rusted metal to your surface? Reactive metal paints are paints that contain metal flakes and can be activated to create rust or other oxidized patina effects. Check out Modern Masters iron paint.

Applying Metallics in Reverse

If you just need a few scratches and chips and want a simpler and faster approach, then you can add your exposed metal areas on top of your paint or surface, instead of creating a metallic base to paint over.

Paint Chips and Scratches

Simply take some metallic paint and use a brush to apply it with distinct edges, in mostly oval or circular shapes. Apply it to areas that would see a lot of wear, like edges and prominent features.

Light Scratches

This is what’s called the dry brush technique. Take a flat brush and dip the very tip in your paint. Dab your brush on a paper plate until the paint is dry enough, or spread along the bristles enough, that you can paint your item with subtle brush strokes that leave the marks of your bristles. Your strokes should go back and forth lightly along edges and areas of wear. You will usually want your strokes to go in the same general direction. Don’t overdo it.

Gradual Friction Wear

For wear that looks more like years of rubbing against clothing, etc, use a tiny bit of Rub N Buff. Apply it on edges and other areas that might come into frequent contact with surroundings.